king size platform bed

The Complete Guide to Making a DIY King Size Platform Bed

Bed frame is one of the most important factor in the look of a successful bedroom. There are many ways to build a bed frame, but this guide will show you how to build a king size platform bed with wood slats and cheap materials that you can find at any hardware store.

The best part about this project is that it can be completed in just one day!

An Introduction to Making a King Size Platform Bed DIY

King size platform beds usually cost about $2,000 to $3,000. If you are not willing to spend so much, then it might be worth it to do a DIY project. You will save money by doing it yourself and you will have a custom bed that is perfect for you.

King Size Platform Bed DIY plans are easy enough for even an amateur woodworker with basic tools like a drill, jigsaw, saw, clamps and screws along with measuring tape or ruler.

The most difficult part of this build is likely turning the space into a usable bedroom.

How Do You Make a Sturdy King Size Bed Frame?

King size bed frames are a popular purchase because they provide a lot of space for your bedroom. However, making a sturdy king size bed frame is not as easy as it sounds.

A king size bed frame needs to have these features: 3/4’s inch plywood, four 2x6s, one 1×6 and one crossbar. It can also use 3/4’s inch particle board or timber from the local lumber yard.

The crossbar needs to be 16 inches long and 2 inches thick. The four 2x6s should be the same length and they should be nailed together on each end with a nail gun to make a square frame.

Check This Out  Best Wall Mount Garage Door Openers For Convenient and Space-Saving Solution

Methods & Materials for Building a King Size Platform Bed DIY

Building a bed is one of the most important and memorable DIY projects. It requires precision, accuracy, and many skillsets. The process may seem intimidating at first, but it is achievable with the right materials and know-how.

The following are some materials that you might need for building a king size platform bed:

1) Planks: You can use any type of lumber for this step that you have easy access to such as 1x Boards or 2x4s that are relatively straight. It’s best to get lumber which has been treated with preservative so that it won’t warp over time.

2) Wood frames: This can be hardwood or plywood depending on your preference. They are typically 10 feet long by 2 feet wide which is enough for most beds.

Steps you can follow to start building a king size platform bed:

  • Build the frame of the bed.
  • Build the base of the bed.
  • Attach the frame to the base, along with some wood screws so it is sturdy.
  • Add the frame to the top of the base.
  • Cut a hole in the side of the base so it is flush with the frame.
  • Add some 2x4s on the inside of the base to provide more support for the frame.

How To Build a King Size Platform Bed with Storage?

The king size platform bed with storage is a popular design for those who want to store their clothes and other items in the bedroom.

A king size platform bed with storage is a space-saving design that can accommodate multiple guests. It comes in various sizes and designs. There are also many types of mattresses compatible for this type of bed.

A platform bed with storage is one of the most popular options when it comes to choosing the right bed for your bedroom. This type of bed usually includes both a platform and a storage unit in one piece. The platform is usually placed on top of the storage unit. The storage unit can be accessed by lifting or sliding the platform.

King size platform beds are a popular choice among modern homeowners. They are typically constructed with a metal frame, wooden slats, and down comforters. The king size platform bed is also an excellent choice for storage because it can be used as a home office or to store blankets and pillows.

Check This Out  Black Stainless Steel Appliances and Their Effects to the Kitchen

Here are some pictures of king size platform beds with storage for your ideas :

King Size Bed By Vojtech Bruzek
King Size Bed By Vojtech Bruzek
King Size Bed By Nathan Oakley
King Size Bed By Nathan Oakley
King Size Bed By Ralph Ravi Kayden
King Size Bed By Ralph Ravi Kayden

How to Make a DIY King Size Platform Bed

If you’re looking to revamp your bedroom and add a touch of style without breaking the bank, building a DIY king size platform bed might be just what you need. In this article, we’ll show you how to create a comfortable and stylish platform bed that’s perfect for your king-sized mattress.

Materials Needed

Before we get started, here’s a list of materials you’ll need:

  • 4 pieces of 2x8x8 lumber
  • 10 pieces of 2x4x8 lumber
  • 2 pieces of 4x4x8 lumber
  • Wood screws (2.5 inches)
  • Wood glue
  • Sandpaper
  • Paint or stain
  • Drill
  • Saw
  • Measuring tape
  • Level

Step 1: Cut the Wood

The first step is to cut the wood to the appropriate size. Cut four pieces of 2×8 lumber to 80 inches in length for the base of the platform bed. Cut two pieces of 4×4 lumber to 10 inches in length for the legs of the bed.

Next, cut eight pieces of 2×4 lumber to 76 inches in length for the sides and middle of the bed. Cut two more pieces of 2×4 lumber to 80 inches in length for the head and foot of the bed.

Step 2: Build the Base

Now that you have all of the wood cut to size, it’s time to build the base of the platform bed. Lay the four pieces of 2×8 lumber parallel to each other, with a gap of 1/2 inch between each board.

Take two pieces of the 2×4 lumber and attach them to the base with wood screws, one on each end. These will serve as the support for the middle of the bed.

Step 3: Build the Frame

Next, take the eight pieces of 2×4 lumber and attach them to the base using wood screws. Start by attaching the two side pieces, followed by the two middle pieces.

Check This Out  Choosing The Right Cycle on Bosch Dishwashers

Then, attach the head and foot pieces to the sides using wood screws. Make sure everything is level and square before moving on to the next step.

Step 4: Sand and Finish

Once the frame is complete, use sandpaper to smooth out any rough edges or surfaces. Then, apply your desired paint or stain to the wood. Allow the finish to dry completely before moving on to the next step.

Step 5: Attach the Legs

Finally, attach the two pieces of 4×4 lumber to the corners of the bed frame using wood screws. Make sure they are level and secure before placing your mattress on top.

Congratulations, you have now built your very own DIY king size platform bed!

Benefits of a Platform Bed

Platform beds have become increasingly popular in recent years for a number of reasons. Here are just a few of the benefits:

Space-Saving

Platform beds are great for smaller bedrooms because they don’t take up as much space as traditional bed frames with box springs.

Comfortable

Because platform beds are lower to the ground, they offer a more comfortable sleeping experience.

Stylish

Platform beds come in a variety of styles and finishes, making it easy to find one that fits your personal style and decor.

Cost-Effective

Building your own platform bed is a cost-effective alternative to purchasing one from a furniture store.

Conclusion

Building a DIY king size platform bed is a great way to add style and comfort to your bedroom without breaking the bank. With just a few materials and some basic tools, you can create a beautiful and functional platform bed that’s perfect for your king-sized mattress.

FAQs

How much weight can a DIY king size platform bed hold?
A properly constructed DIY king size platform bed should be able to hold up to 500-600 pounds, depending on the type of wood and hardware used.

How long does it take to build a DIY king size platform bed?
Building a DIY king size platform bed can take anywhere from a few hours to a full day, depending on your skill level and the tools you have available.

Do I need to be an experienced woodworker to build a DIY platform bed?
No, you don’t need to be an experienced woodworker to build a DIY platform bed. However, it’s important to have some basic woodworking skills and knowledge of power tools.

Can I customize the design of my DIY platform bed?
Absolutely! One of the benefits of building your own platform bed is that you can customize the design to fit your personal style and preferences.

Can I build a DIY platform bed for a different mattress size?
Yes, you can use the same basic steps and materials to build a platform bed for any size mattress, whether it’s a twin, full, queen, or king. Just be sure to adjust the measurements accordingly.

King Size Bed By Amira Aboalnaga
King Size Bed By Amira Aboalnaga

Leave a Comment